You may need to decrease or increase the detection radius for one or more Detection Channels on the Zone Protector to best suit your environment.

Configure the detection radius (Zone Size)  for each Detection Channel as follows

  • Connect to the Zone Protector via the web interface and browse to Device Settings > Detector Settings
  • Select the Detection Channel(s) you wish to modify  (Each channel has its own sensitivity settings)
  • To increase the detection radius slide the Sensitivity Threshold slider in the direction of Most Sensitive. (Try not to go below 40 dBr)
  • To decrease the detection radius slide the Sensitivity Threshold slider in the direction of Least Sensitive (Try not to go above 65 dBr)

Set the sensitivity for ALL channels at once by using the MUTE button (No computer required) – Requires  Firmware Version 2.29A  

sensitivity

The sensitivity settings may vary depending on the environment, for example walls and metal surroundings tend to give different results to an open plan office.
Furthermore cell phones closer to a cell phone tower tend to emit less power than those further away from the tower.

N.B Ensure you alter the sensitivity of each channel to best suit your environment and test each channel individually..