The Zone Protector ships with the North American Cell Phone frequencies populated in the detection channel table. While a factory reset will cause the Zone Protector to reset to its [...]

The following mobile phone frequencies are broadly used across Europe. (Note the newer 4G/LTE frequencies 800 Mhz  and 2600 Mhz) Description  Lower Freq Mhz Upper Freq Mhz Euro IMT-2100Mhz 1920 [...]

How to enable or disable RF detection while leaving the Zone Protector switched on This useful feature allows you to configure the Zone Protector (at your desk for example) with [...]

How to view the  version of firmware running on the Zone Protector? Login to the Zone Protectors web interface Click on Device Information The current firmware version is displayed on the [...]

In some instances it may be necessary to switch off all local alerting (i.e. audio voice alerts and visual LED alerts) and view alert history via the Zone Protectors event [...]

How to upgrade the firmware on the Zone Protector The Zone Protector firmware can be upgraded via its web interface Before commencing an upgrade, first check the version of firmware running on [...]

With firmware version 2.15 onwards it is possible to quickly identify which channels are actively detecting (i.e channel detection set to on) Login to the Zone Protectors web interface Select [...]

How to identify what signals are causing the Zone Protector to alert? The Zone Protector adds an event to the System Event Log each time it alerts. It is possible to view the [...]

A designated range of frequencies are allocated for cell phone use in each country, and in many cases the same range of frequencies are used across multiple countries. The following websiteshould help [...]

Understanding the default channel settings The Zone Protector is factory preconfigured for Cell phone detection in the USA and Canada (Wi-Fi detection disabled by default) Channels 4, 5, 6, 7, 9, 10 [...]