Understanding the default channel settings

The Zone Protector is factory preconfigured for Cell phone detection in the USA and Canada (Wi-Fi detection disabled by default)

Channels 4, 5, 6, 7, 9, 10 and 11 are all enabled by default.  (How to identify what channels are enabled)

N.B For normal operation it should not be necessary to alter the Channel Name, the Detector RF Range and the Detection Method for the preconfigured channels.
It is also not necessary to enable all the factory pre-set channels on the Zone Protector, as this may cause the Zone Protector to detect unwanted signals and alert unnecessary.

Additional Information

Learn how to adjust the Sensitivity Threshold for each detection Channel  (Channel Detection Radius / Detection Zone Size)

Understanding the RF Detection Range settings and how to Add Detection Channels for other Countries